Aerial 1x8 PLC Fiber Optic Joint Enclosure Model:MBN-FOSC-A9-1

MBN-FOSC-A9-1 Fiber Optic Joint Enclosure is designed for in-line application to provide a protected access point between the distribution cable and drop cable. This PLC splitter Fiber Optic Joint Enclosure can keep internal components away from outdoor environmental damage. Its flexible configuration supports 2 cables in and 2 cables out. Cassette-type optical splitter could be built-in. Good performance is useful in a harsh environment for Fiber Optic Joint Enclosure.

Features

户外一pplication.
High structure material with UV resistance and good weather adaptability
It can be installed one 1:8 Blockless PLC splitter.
12cores Fusing Splice available.
2*3mm drop cable both ends in and out.
The Fiber Optic Splitter Box is spacious enough for winding and storing fibers.
The mechanical sealing and advanced internal structure keep good sealing performance after re-entry and re-using.
Easy open and close of closure with a very little tool.
Suitable for bunchy fibers
Aerial, wall-mounting
Protection Grade: IP 65
It’s especially applicable to FTTH optical fiber distribution.
Separate area for distribution cable and drop cable, easy for expansion, and service provisioning.

Introduction of fiber optic distribution box

Thefiber distribution boxcomes with splice trays and cable management for splitting incoming and outgoing cables. Made to fit a wide range of installer needs, the enclosure features exposed front and rear panels in order to allow for easy access to all areas inside.

It can splice multiple cable transmissions in one box with just minimum number of splice trays. And it also comes with combining splice trays for keeping the cables split into outgoing and incoming flows.

Types

There are two types of fiber optic distribution box, one is wall-mounted fiber optic distribution box which is used on wall and the other is Pole mounted fiber optic distribution box.

Material

The optical fiber cable distribution box can be made of plastic, metal or SMC All of these three material fiber optical distribution box can be found from Bwinners. You can choose the suitable one according to your requirement. Bwinners will show the material as below.

Plastic

Normally theplastic fiber distribution boxmaterials used are PP, ABS, ABS+PC. The differences between those materials are in the density to obtain more impact resistance, temperature and flame resistance.

ABS is also cheaper than PC and is the most used for regular environments.

ABS+PC Strong material to endure harsh environmental conditions.

PC+ABS material used ensures the body strong and light.

Metal

Thismetal fiber optic distribution boxcomes with a durable metal construction to provide additional strength and reliability.

The metal material that is used to make the box is strong for outdoor uses, and waterproof for enhanced durability.

SMC

SMC (Glass fiber reinforced plastic) Fiber Distribution Boxis lighter than the metal material box but stronger than the plastic material box, and can be molded to be different beautiful shapes. For Indoor/Outdoor application.

If you don’t sure what material is suitable for your network project, just feel free to contact us, we’d like to provide you the best solution.

Features of Distribution Box

• High mechanical strength
• Corrosion resistance
• Good sealing performance
• This enclosure is designed to house up to 24 splices or 144 fibers.
• The distribution box can be installed on the wall orcabinet, and provides a high-density fiber optic connection.
• Can accommodate a variety of cable connections, including terminals with sanded or non-stripped fibers.
• Indoor fiber optic distribution box can be divided into8 cores, 12cores, 16cores, 24 cores, 48 cores specifications according to the project need.
• Outdoor fiber optic distribution boxes are equipped with cable inlets and outlet ports, which can easily connect with the inlet and outlet cables.
• FTTX fiber optic distribution boxes are designed with a high density of fiber optic connectors and can be used to connect multiple distribution hubs in one location, which is convenient in large-scale projects.
• Fiber optic distribution box is widely used asfiber patching panel, fiber splicing box and fiber termination box, etc.
• The structure of FTTX fiber optic distribution box is strong and light weight, flexible to fit different pole sizes and easy installation on site.
• FTTX fiber optic distribution boxes come with various colors to meet customer requirements

Why Distribution Box

• Simplify the cable management:

与纤维分布盒子,你可以期望cables to be organized without having to deal with difficult cable management issues. Simplified installation and maintenance with movable structure.

• Pre-installed splice tray:

You don’t have to worry about having problems with the internal connections because it comes with a pre-installed splice tray.

• Available to add extra protection:

The fiber optic box is designed to accommodate multiple fusion splice trays and splice protection sleeves. You have the option of adding on other accessories and security features so that you are able to add extra protection whenever necessary.

• Easy installation:

The fiber optic box is designed for easy installation which means that you can finish setting up the equipment and have everything installed in a short period of time.

• Multi-functions in one box:

The fiber optic distribution box is used in wiring, splicing, distribution, and terminal connection ofoptical fiber cable. Inside with tray for splicing and easily accessible main cables. Cable connection and splicing can be carried out in the same box.

Structure

The structure of the optical fiber distribution box is mainly composed of the box body, the internal sheet metal workpiece, the optical fiber movable connector, and the spare accessories.

The structure of the fiber optic distribution box is composed of several functional units. The functional units are :

1. Making theSC or LC fiber adapter,
2. Connecting withoptical patch cordorfiber pigtail,
3. Connecting with mechanical patch cord,
4. Connecting withoptical drop cableor communication line

Application

Provide fixing space for optical fiber or other devices, suitable for fiber to the home (FTTH) applications;

Network interconnection

Resource sharing can provide users with various services such as voice, data, radio and television

Fiber To The Cabinet (FTTC)

Fiber To The Building (FTTB)

CATV networks

Optical fiber communication

FTTX

Fiber optic network convergence

Optical fiber access network

Telecommunication networks

Data communications networks

Local area networks

Manufacturing of fiber optic distribution box

manbetx体育开户is a professional fiber optic distribution box manufacturing company that makes durable fiber termination box in China factory. Quality assurance, best after service is available.

Package of fiber optic distribution box

Bwinners always packages the termination box by hard carton, if you have customized package requirement, we also support your demands based on MOQ. Contact us, send us your requirements in email, we’d like to meet your satisfaction.