Overhead 24 core fiber optic connector shell models:MBN FOSC -- A8

Optical fiber connector boxIs commonly used in the network system hardware.It mainly appear at the end of the fiber, used to connect optical fiber.

It can also be used to protect and finishingFiber optic cableFrom unnecessary damage.

FThe"OGerard piques.splicingClossmaterial

Optical fiber connector box made from metal and ABS/PC/PP plastic, not easy to rust, good thermal stability.Metal has good rigidity and strength and the plastic has low cost, high strength, light weight, beautiful appearance, etc.Metal parts are usually made of aluminum alloy or stainless steel and plastic parts made of polypropylene or polyethylene terephthalate (PET), and other engineering plastic.

The choice of optical fiber joint closure materials can determine your project is success or failure.thisTerminal blockYou are using should be suitable for the project plan specified in the manhole or pull box.In addition, the optical fiber connector box should be according to your project details table tags.Select the desired closed type, cable should be installed to the shell.

enkelossTYPES

There are two types of joint closure: vertical and horizontal.Perpendicular to the fiber optic connector boxCan withstand external weather conditions.Outdoor needs a high level of sealing and waterproofing.Optical fiber connector box can hold 288 optical fibers from several optical fibers to any location.They are small and durable, can provide maximum protection, especially in harsh outdoor environment.

Another type of optical fiber connector box is vertical.These are known as fiber dome, similar to the horizontal type.thisVertical closureSpecially designed for buried application, by the high quality engineering plastic.Vertical with one, two, or three entry/exit ports.Perpendicular to the fiber optic connector box usually used in CATV, telecommunications, and optical fiber network.

Vertical closure, it looks like a dome.These are normally used for landfillFiber optic cableIn a variety of applications, such as "tap" FTTH position in the air.Although these closing device is very suitable for buried applications, but they can also be applied to the ground installation.Cable entry capacity should be close and network capacity and number of cable used in the match.

structure

Most cap of the basic design includes two main parts: a base or bottom, connected to a plane.And a cap on the base of the dome shaped lid.

manbetx体育开户Bwinners optical fiber connector box consists of three parts: shell, dust cap, and dust cover.Shell made of metal or plastic with a rubber ring seal, prevent dirt into.Dust cap made of plastic or metal, can be used for sealing and dustproof.Dust cover can be open for inspection maintenance;It can also be tightly closed when not in use to prevent dust.

function

Optical fiber connector box has many advantages, therefore very popular with people.It protect the fiber optic cable from heat, moisture, corrosion and other external factors.

The product application

Perpendicular to the fiber optic connector box has a variety of configurations, with different inlet and outlet port.The large capacity model can be used for large networks, the number of splicing plates may be different.Dome type optical fiber connector box must use waterproof technology and advanced sealing, in order to protect the cable from insects.Optical fiber connector box must also prevent dust from entering the underground.

Installation method:

• Aerial cable installation
• Stud installation
• Wall-mounted installation
• Manhole and hand hole installation
• FTTH access layer

Level of optical fiber connector boxIs cylindrical or flat, and they meet and horizontal counterparts of the same specification.They are usually used in underground or air applications.Level of optical fiber connector box designed to withstand to 40 degrees Celsius to 85 degrees Celsius temperature range.On the other hand, the vertical optical fiber connector box similar to the dome.The two closure with the same functionality, but they are usually used for buried application.

Optical fiber connector box in the port number to measure the ability to accommodate a variety of types of cable.Closed the port number is important because it shows how many cables in a network.Closure member depends on the number of ports you need the number of cable termination.Smaller ports for branch cable and branch cable, large port for large cable.