More than 16 years of design, development and manufacture of various kinds of fiber optic equipment experience, our production line is equipped with advanced machines.
Focus on the optical fiber and telecom industry supplies more than 16 years.
Sample: 1-3 days.
General order: 5-15 days.
Big order: 20-35 days.
Optical fiber and FTTx solution products direct from the factory at the lowest prices.
For optical fiber and FTTx solution products provide OEM and design drawings.
MBN - FOSC - N SC/APC can be installed connectors at the scene
MBN - FOSC - L52 - APC&MBN - FOSC - M52 - APC&MBN - FOSC - L50 - UPC&MBN - FOSC - M50 - the UPC
Pre polishing fiber quick connector
MBN - FOFC - FC1 - APC FC APC fiber optic field assembly fast connection
MBN FOHM - APC & MBN FOHM - UPC hot melt welding type SC connectors
manbetx体育开户A brief introduction Bwinners fiber optic jumper
manbetx体育开户Quick Bwinners optical fiber connector is a kind of allows you to quickly termination equipment of fiber optic cable.Fiber using the quick connector, terminal just less than a minute.So, how is that possible?This is because the unique design of quick connector.
manbetx体育开户Quick connector Bwinners optical fiber after polishing.You don't need to manually polish them like other types of connectors.That is to say, create their optical fiber connector factory further quickly, so they can be used at any time.
They have the refractive index matching gel and used for immediate termination of cutting fiber stub.If you need a simple and clean termination solution, this is the best choice.Using these quick connector FTTH, you don't need a technical program.
You just need to get the right type for your fiber optic cable termination.These optical fiber quick connector use mechanical clamping and cutting fiber optic cable end alignment.Therefore, you need to insert the optical fiber connector body.
manbetx体育开户Bwinners fiber quick connector usually has two kinds of single-mode and multimode.Therefore, you will find that they are varied.It is good for you.You can use them to termination of 2 mm and 3 mm sheath line, as well as including (including 250 m and 900 m.
Another astonishing fact is that you can be used multiple times (Field Assembly Connector) quick Connector.Why is this so?They are reusable and easy to install.They also have low insertion and return loss.
If you are interested to know more information about the optical fiber quick connector?We have prepared a detailed list of lists all the questions often ask you.
Thereformanbetx体育开户e, before you order Bwinners fiber quick connector, please take time to read the following questions:
How to use optical fiber quick connector?
You can use the fiber quick connector to connect two cables or optical fiber to complete a light path.
If you have oneThe fiber distributionOr transmission line, then you need a quick connector.No it won't be able to form a continuous fiber optical path.
You can use in the application of different fiber quick Connector (Field Assembly Connector).The most common application including cable, optical fiber to the home (FTTH) applications and optical fiber communication network.
In short, if you want to be a low-costmanbetx体育开户, high-quality connector box type, low insertion loss, you need to use quick Bwinners optical fiber connector.
It is easy to install and maintenance.
How to install fiber quick connector?
You need the right tools and procedures can be successfully installed fiber-optic quick connector.Some of the components you need to include:
Have after all of these components, you can start to install fiber quick connector.
The installation process is simple.You only need to do the work carefully and thoroughly.
What are the types of optical fiber connector?
You will find in the market all kinds of optical fiber connector.They are made in different ways, to help the optical fiber network.Although they are many, but here's what you should know about the most common types:
This kind ofSC quick connectorIn terms of size is quite big.If you want to be a cmanbetx体育开户onnector can be used with expander, Bwinners SC quick connector may be the best choice.
When it comes to shape, SC quick connector is square.It USES simple push-pull mechanism with a 2.5 mm ferrule to fixed to the position of you put it.It also has many USES and can be used for single-mode and multimode fiber.
Compared with other types, SC quick connectors are more durable, low cost and easy to use.
If you are do business system or network wiring, so maybe that's what you need.It USES a socket and a bayonet plug to complete the connection process.The ring also like SC connector is 2.5 mm.
In order to maintain in situ and perform its function, this connector is a bayonet lock to fix it.So, if you want to be one of the most suitable for use in the narrow space connector, you can consider this option.
In order to get better performance, you can put the ST and FDDI, ESON, mixed FC and SC connectors.You just need a hybrid adapters can complete this process.
You can easily insert and pull out ST connector.Also note that you can only use them at the end of the cable more code.
LC quick connector size smaller.If it is compared with SC quick connector type, LC quick connector is almost half of the other types.Shape is a square, if will take more optical fibers, best effect.
The ring of the LC connector is about 1.25 mm, these connectors use clamps to create duplex connections.So you can use them in a single-mode and multimode optical fiber cable.
For multiple connections and space relatively small area, LC quick connector effect is very good.
If you need reliable data transmission network connector, FDDI is likely to be the best choice for you.It has a large container containing two ring.
You can use it to connect to the LAN.To items will be fixed in place, this connector used extrusion mechanism.
In order to get better in your network connection and performance, you can put the FDDI connector with SC and ST matches.
Unlike other connector, FDDI is suitable for the long-distance data transmission network.
What is the most common type of optical fiber connector?
You will find in the market on a question of interpretation of all types of fiber coupler and connector.SC type, however, is a more common type.
Quick connector SC/APC | SC/UPC is very popular, so the application of the worldwide than all other types.Maybe it's because they have to enter the market for decades.As a kind of reliable connector as a result, they won the trust of the customers.
After Fast Connector SC/APC | SC/UPC type, another kind of LC is the most common type of optical fiber Connector.They are the new style on the market.Over time, they can also become a notable type, at least, according to their current needs.
What are the application of optical fiber quick connector?
You can according to different applications use fiber optic quick connector.It all depends on whether you ultimately want to achieve.
The most common applications include: optical fiber quick connector
Usually, any work involving optical termination may need to use fiber optic quick connector, namely the termination optical fiber connector.Therefore, get the best quick connector.
Not only do you need a connector, also need a reliable connector for your application.Use high quality quick connector can usually be quickly and easily for termination.
Optical fiber connector is what look like?
Although there are many kinds of optical fiber connector design, but there are some common features can be identified.Therefore, it is easy to pick out them from other fiber optic products.
Optical fiber connector key identifier is a prominent ring.It helps to align and fixed optical fiber for termination.All connectors, whatever its type, has the unique function.You can notice it easily.
Another key feature is that all the optical fiber has a matching adapters.It is used to match two ring fixed agencies work closely with optical fiber connectors.
When it comes to the real appearance, you should also notice the body of the optical fiber connector is almost similar.The vast majority is ceramic.However, you will find that some are made of plastic or metal.
What type of connector used for termination of optical fiber cable?
Fiber optic cable typically use straight head (ST) connector.It is most suitable for all kinds of network application.
ST a quick connector for its durability and efficiency in the termination and become a popular choice.They are metal or plastic body with 2.55 mm ring.
Ideally, the most suitable for cable fast optical fiber connector assembly is to be able to meet all the necessary termination purpose connector.In other words, it should be aligned adjacent optical fiber in optical fiber connector of the photoelectric detector, optical receiver and optical emitter launchers.
ST field termination optical fiber connector can be used for single-mode and multimode.So, if you have a multimode optical fiber LAN, this is the best connector.
As for the proposal, although ST connector is suitable for fiber optic cable, but do you want to achieve results usually determines the connector.You should get one of the most can meet in the network application would you like to use it for the purpose of connector.
Why use Fast Connector termination there will be a high loss?
In most cases, the high loss is caused by fiber inserted into the bad.It not only can cause damage, and optical fiber fracture, leading to further problems.
If optical fiber fracture, inside that you will have to change a new to complete the termination.If it does not break, you can pick you up again end of fiber and use it.You can repeat three times.
To termination of your fiber fast connector, please put back the wedge clamp on the quick connector.To ensure that the clip for ring and then push it joint wedge again until I heard it.At this point, you can to termination of optical fiber.
If you want to get good termination with minimal loss, well cut, please.Before quick insert the optical fiber connector, you should also cut it again.
If it does not provide solutions?In this case, you only need to rotate carving knife blades.To perform this operation, please ensure that the optical fiber loose wedge clamp before slightly bent.
Please note that there is an example, even if do all these things, loss is still there.If you encounter this kind of situation, please seek expert advice.The best you can retry the process XNUMX times.If it can't solve the problem of missing, technical staff can help.
However, you should first make sure you have exhausted all the options.Hurry to buy a new optical fiber before prove that it is faulty quick connector can be costly.
If you've done before termination and you know how it works.Try to insert does not exceed XNUMX times.In the past, to seek expert help.
Bonner fiber quick connector technology personnel can help you solve the problem.As experts in the field, they have to as low as possible the loss of effective termination everything you need.
What kind of connector is used in the multimode optical fiber LAN applications?
ST fiber connectors are you one of the most common type in the LAN application market.It has been and is still the best optical fiber cable connector.
It can be used for single-mode and multimode.That may explain why you'll find it in a wide range of application.Almost multimode optical fiber LAN application USES this type of connector.
ST connector is mainly made from ceramic, but you will also find some made from plastic or stainless steel alloy.
This kind of connector plug core is relatively long (2.5 mm).If you want to get better performance in your fiber optic network, you should use this type of connector.
Optical fiber quick connector tool suite contained in CT - 30 and computed tomography (CT) - 05 cutter have what effect?
CT - 30 and computed tomography (CT) - 05 can cut single fiber.They exist in the toolkit that you need before termination they use them to measure the correct fiber cutting length.
CT - 30 has a relatively large blades (16), can help you cut up to 48000 single fiber.CT - 05 also performs a similar job.
So, in short, these tools are used to in the use of optical fiber fast connector termination before measuring the correct cutting.
If you can direct optical network terminal (ONT)?
Yes, you can directly connected to the optical network terminal.However, you should pay attention to, although it works, but it will bring a lot of security risks.
In order to reduce the security threat, you should go through the Ethernet LAN connection to the ONT.In this way, you can use the Ethernet port on the ONT to create links to almost all of the equipment.
Ideally, ONT the optical signals into electrical signals or copper.Therefore, ONT can easily convert all kinds of signals, including television, data, and even voice, depending on how you want to achieve.
As a precaution, please note that due to various reasons, connect your computer directly to the ONT may not be a good idea.It may not work, especially on the Internet.
To solve this problem, maybe you can connect your computer to ONT WAN port, it is best to use the LAN cable.This means that you must be properly adjust the Settings, so as to complete the connection.
What is the fiber of the LC PC connectors?
LC (PC) is a small optical fiber connector, use 1.25 mm insert core.It is usually a ceramic type, has the standard ring all function.
LC PC connector is easy to termination and provide good performance.You can use any adhesive, the effect will be very good.
Although it applies to the multimode, but when you use it for single mode application effect will be better.
How to separate my LC connector?
For whatever reason separation of LC connector is a tricky thing.If you want to minimize the chance of damage, you will need to be careful.
Given the steps involved in the process and the nature of work, the best way to describe separation process is visual.
.
How to install the LC optical fiber connector?
Install LC for single-mode and multimode optical fiber connector is a very simple process.But only when you know what to do and how to complete each step.
The following is a effective LC connector installation steps you can follow:
Just go except sheath and cable sheath.Doing so will help to make sure that you expose buffer fiber.You should be exposed to up to 36 inches, to help in the next step easy connection.Be careful not to pollution in the process of the fiber.
Remove the divider between the resin and hardener of epoxy resin.In addition, it allows them to mix before into the syringe.Be sure to tip up hold to discharge the air in the syringe.
Before installation, first of all, to ensure that the sophisticated pore unimpeded.If not clear, please use the wire to remove it.Find support and coated with you before the epoxy resin into the syringe.It into the ring.
The fiber optic insertion you prepared.When it is in place, the pull back a bit.Make sure that you will not destroy it in the process.You should also ensure that buffer support back to cable.
At this stage, you should look at what you do, make sure that everything is in good order.If your LC connector have instructions on how to install it, please access them again.It can help you identify any fault before continuing.
To effective data or signal transmission, you must clean the connector or adapter.Use the recommended cleaner, usually isopropyl alcohol.In the wet dishcloth, and then use it to clean ring.
Using LC adapter brush clean the adapter.Wet brush with alcohol and then clean it with canned air.However, if the installed connectors, should not clean the adapter.
This is simple process of LC connector installation.But as a precaution, you should note that different connector manufacturers usually comes with instructions on how to install them.Follow them and what you learn here, so you can make this process as simple as possible.
How to install ST fiber connectors?
If you have a ST fiber connectors and want to install it, you only need to learn something.
The process is neither simple nor too difficult.
How to connect the fiber optic cable to quick connector?
Connect the fiber optic cable to quick connector is very simple.Quick connector through pre-installed and polishing, available at any time.
If you want to good performance, please ensure that cutting part is clean and properly handled.
In order to properly connected, you can follow these steps:
As a piece of advice, you should be in the process of connecting test connector as much as possible.It can help you find any mistake as early as possible.When you are in the initial stages of error notice a mistake, it is easy to correct mistakes.
Why I can't insert the fiber optic cable quick connector?
If you can't insert the cable connector fast, there may be a problem.This suggests that something is missing or in imperceptible in interference.
In most cases, the cause of the problem is the wedge clamp.If improper handling in transit, this typically happens.If this is the case, you will not be inserted into the cable.
So how to joint clip, in order to insert the quick connector?Just squeeze the clip of the bottom and top.If you hear a clicking sound, it is show that wedge clamp merger can use now.
Is that all?No, there may be other reasons will lead you to insert the cable connector.What is that?
So, if in the process of preparation, you will be optical fiber cutting too long or exceed the recommended distance, it is likely to lead to the problem.What will happen is the connector will not clip into the right part of the connector.Meaning?You don't correctly inserted into the optical fiber.
To solve such problem, please make sure that the length of the fiber is less than 10.5 mm.If the mistake is beyond this range, you should be stripping, cleaning, cut it, and then insert the optical fiber to the connector again.
What is the difference between LC and SC fiber quick connector?
Although their use almost the same, but the LC and SC fiber optic connectors is slightly different with each other.
They are one of the huge differences in size.SC fiber quick connector has a 2.5 mm plug cores, andLC fiber quick connectorThere is a 1.25 mm rings.
Another difference between the optical fiber quick connector is size.SC fiber volume of quick connector is almost twice of LC fiber quick connector.These size differences affect each of these connectors used in different applications.
LC optical fiber connectors are optical fiber is often used to cluster the areas quickly.Good example is the data center, and even in the office of different network connections.
Behavior is another difference between the two connectors.SC type connector is used for locking the push-pull system, and the LC connector with locking system.LC type can be a little innovation, therefore has higher demand than SC type.
In addition to the above differences, these fiber quick connector is almost the same in terms of speed and life.Their insertion loss is almost the same.
So, you choose the type of between them should be depending on the type of application you have and you intend to achieve.If you are indifferent, please ask for help.You will learn and want to make wise decision.
How to use SC fiber quick connector?
SC connectors used mainly in the field of audio and video cable.Unlike other connector, SC type easy connection.When you need to replace or adjust/repair them, they are also easy to broken.
Usually, if you want to good performance, then the SC fiber optic connector is the best choice for you should consider.
The reliability of the for your reference, they also passed the test of time.They have been in the market for a long time.
How to open the SC fiber quick connector?
In most cases, if you want to be replaced, you will want to open the SC connectors.Remember, even if it is possible that a good connector, it won't last for a lifetime.
After a few months, you may need to replace.Now know how to open the connector become very important.
Open the SC connector requires several steps.Is the most important is pay attention to maintenance, in order to avoid damage, especially when you want to use SC connectors.
How to use the Subscriber Connector (SC) pre embedding quick Connector?
Embedded type quick connector is made up of three parts, a variety of functions can be performed to help it.Want to use it correctly, you need to have the right tools and understand the process of using it.
Fiber optic components of SC connector is what?
Optical fiber user connector (SC) has five basic elements.These are the distinguish with other types of connectors.
Although various mechanical design differences of SC connector, but these elements are universal.
If you want to get high quality fiber SC connectors, please note the following structural elements:
Every SC connector shell.Shell has two important functions.It provides a mechanism for help to the connector into the adapter card.It will also be the whole structure and components are fixed in place.
SC subcomponents subject with special structure mechanism, help to optical fiber and cable fixed in position.From the main body, the ring end to cooperate with another connector.This occurs in the casing.
In general, the entire user connector is built on a ring.Depending on the manufacturer, the ring may be different, but the vast majority are 2.5 mm.It can also be made of metal or ceramic.
The center of the ring is a hole for inserting bare fiber optic cable.In order to firmly, use glue or epoxy resin adhesive.The other end of the optical fiber polishing smooth and good, so that the complete path when connected to another connector.
In order to obtain greater strength and easy to operate, SC connector has a root pressure for fiber optic cable in main body (children).Cable helps to deal with, so you won't impose unnecessary pressure on the connector.
Just like any other fiber optic products, SC connectors could be damaged.To prevent this kind of circumstance, the connector has a decompression chamber.It covers the joint between the cable and connector main body.
To illustrate the user connector cable component parts, there is a picture.You will notice that, in fact, each element can play a role:
How do you evaluate the quality of the optical fiber quick connector?
You can use different methods to assess the quality of the optical fiber quick connector.The best approach is to use a microscope.
Using microscopy and check the connector.To get the real picture, please check from the perspective of as much as possible.You can tilt the connector, in order to better observe and detect any defects.
So, how to use a microscope to determine the quality of the connector?Very simple.High quality quick connector should have smooth surfaces.Surface should be no scratches.
If there are any gaps or signs of cracks, so it may not be a good connector.Optical fiber connector highlight or ring back to the way of point should not be damaged.
How do I know what kind of connector for cable?
If you want to get the most appropriate optical fiber connector quickly, you need to evaluate a few things.
First, make sure you're dealing with electronic products or whether the application need to connector.If so, what kind of connector is best can achieve a goal?ST and SC or LC connector?You can't pick.There is a kind of the most suitable for your network.
Second, you use what kind of optical fiber to connect?More precisely, it is a single mode fiber or multimode fiber?I know this is very important points will lead you to find the most appropriate optical fiber connector type fast.
Finally, whether you need your network specific types of optical fiber connector quickly?If yes, please choose the type of recommendation.It is recommended to use this type for a reason.If you choose any type, you are likely to encounter problems.
You should always take time to assess network requirements.It will help you to reduce the many options of a few.
Please keep in mind that not only do you need any quick connector, connector will also need a can work normally.In case of any challenge, please always ask for help.
What might damage the optical fiber connector quickly?
There are several things will damage the optical fiber quick connector.It is interesting to note that most of the time we think the damage from the big problem.For your information, even if the fingerprint is enough to cause trouble.
Quick connector damage is one of the main reasons for improper use.This may be due to use during the installation process is not the right tools, improper handling, and ring does not match.In addition, if you are not clean in under the condition of repeated connection, is likely to damage your connector.
Optical fiber quick connector damage of another main reason is the pollution of oil and gel.In fact, these drugs are required, especially in the insert for the first time.However, as time goes on, they tend to attract dust/dirt and eventually cause damage.
Fit too tight is another cause of the damage.For quick connector, closer connection is not good.For electrical connections may be no problem, but for the fiber optic connector quickly, it will cause damage.
Ideally, the quick connector's job is to connect the two optical fiber end face together.Once these faces strong, the road is completed.Further tightening it will not only threaten their safety, can also lead to high return loss.In addition, the closer connection will cause damage to the glass.
Other factors, such as improper cleaning can also cause damage.You should use the recommended cleaning procedures in order to avoid damage.
How to fix the fiber optic cable connector?
Just like any other products, fiber optic cable connector could be damaged.Fortunately, you can repair it, it won't interrupt your network.
To fix it, you need to do some things.These tasks may include cutting cutting optical fiber and optical fiber cable, strip light cable, crimping terminal.How to fix the depends on the extent of the damage.
What is the distinguishing feature of optical fiber quick connector?
When choosing a quick connector, you need to pay attention to show good performance factors.Here's what you should pay attention to the function:
A good quick connector should allow you to low insertion loss termination.If the loss is higher, the performance of your network or application may be poor.
A quick connector should not be high quality service for you again.It should be at least can reuse several times.
Since most quick connector usually after polishing, so as the user you should be easy to install.However, not all quick connector.So use those easy.
Check all of these functions in the decision.You don't need any quick connector, but need a connector can provide you with excellent performance.
Company production of optical fiber quick connector is best?
manbetx体育开户Bwinners company is one of the best optical fiber quick connector manufacturer.If you want the connector and other high quality FTTx products, this is the best company.
manbetx体育开户Bwinners fiber made from quick connector with mature modern mechanical joint technology.This ensures that the connector correctly aligned, accurate cutting and has low loss termination.
Whether you need manbetx体育开户a single mode or multimode optical fiber connectors, Bwinners can find the best choice for you.More precisely, you'll find a reliable, simple, clean and fast optical fiber quick connector.
Usemanbetx体育开户 quick Bwinners optical fiber connector, you don't need any special tools or knowledge to get the job done.With the help of a simple instructions and some of the quick connector kit components, you can finish the work.
Quimanbetx体育开户ck connector termination Bwinners optical fiber used what's the best way?
Use manbetx体育开户only the Bwinners recommended procedures.You should keep in mind that the location of the connector for you to get them.In addition, different manufacturers use different technology in manufacturing products.
Before expiration of the start, it is better to first set up the workspace.The best, you should get a black mat, because in such fibers on the surface is easy to see you.You can be purchased from a nearby fiber products supplier.
Will you need all around the surface termination tools in your work.Make sure they are within reach.Most importantly, make sure the area light.You can get a battery-powered LED lighting equipment.
Before you begin to end, put on your safety glasses, remind yourself that all safety regulations again.
Then you can continue to complete the termination process.
Why shoumanbetx体育开户ld I use Bwinners fiber quick connector?
Over tmanbetx体育开户he past twenty years, Bwinners has been manufacturing high quality fiber optic products.Therefore, you can be sure, when you get the connector from the company, you are dealing with a team with a good track record.
manbetx体育开户Quick Bwinners optical fiber connector and durable.They are also made in using the best manufacturing technology.As a result, they are the best choice for local and international market.
The fomanbetx体育开户llowing is the use of Bwinners fiber quick connectors for other reasons:
Theremanbetx体育开户 is no doubt that Bwinners fiber quick connector is to meet your needs high quality termination solution.Many contractors are like them.You should also have a try.They may be exactly what you needed for the perfect network solutions
The winner
